This list of equipment is intended for participants of the online Wood Bowl Turning, Start-to-Finish eCourse. If you’d like to directly view the eCourse and all lessons available, click here.
Safety Equipment
- Safety glasses with readers
- Full frame face shield
- Extra face shield replacement panels
- 3M Rugged Comfort Respirator (use filters below)
- 2097 P100 Particulate Filters for 3M Respirator (matches respirator above)
Bowl Blank Prep Equipment
Turning Tools and Equipment
- 1/2″ (shaft diameter) bowl gouge
- spur chuck, or…
- faceplate, (1″x8TPI x 4″ diameter, and 1-1/4″x8TPI x 4.5″ diameter) or…
- screw chuck (doubles as 4-jaw chuck) (1″x8TPI, 1-1/4″x8TPI, M33 x 3.5mm)
- Spindle detail gouge, tenon scraper, or mortise scraper
- live center (for tailstock)
- tailstock extension (option)
- four-jaw dovetail chuck (2″/5mm jaws) (1″x8TPI, 1-1/4″x8TPI, M33 x 3.5mm)
- impact driver for faceplate screws (option)
Oneway Wolverine System
- Slow Speed Grinder
- 180 grit CBN sharpening wheel
- 80 grit CBN for shaping wheel
- Oneway Vari-Grind Sharpening Complete System (full set)
- Magnetic Base LED Lamp
- Bowl Gouge Depth Gauge DIY Plans
- Protractor
Sanding and Finishing Equipment
- 3/8″ Close Quarter, Angled Variable Speed Drill
- 2-inch Foam Hook and Loop Sanding Pad with 1/4″ Shank Drill Attachment
- 3-inch Foam Hook and Loop Sanding Pad with 1/4″ Shank Drill Attachment
- additional foam soft interface pad
- 80 Grit Two-Inch Sandpaper Disks
- 120 Grit Two-Inch Sandpaper Disks
- 180 Grit Two-Inch Sandpaper Disks
- 220 Grit Two-Inch Sandpaper Disks
- 320 Grit Two-Inch Sandpaper Disks
- 400 Grit Two-Inch Sandpaper Disks
- Tried and True Original Finish (linseed oil and beeswax)
- Tried and True Danish Oil (linseed oil)
